https://dgcommunity.pulsemicro.com/topic505-distribution-stitch.aspx Tajima DG by Pulse Community - DG15 General Discussion - Distribution stitch - Messages en-us http://blogs.law.harvard.edu/tech/rss Jitbit AspNetForum Wed, 20 Feb 2019 23:19:35 GMT Wed, 20 Feb 2019 23:19:35 GMT https://dgcommunity.pulsemicro.com/topic505-distribution-stitch.aspx So when stitches are generated based on digitized outline/path, stitches are distributed to each 0.1/0.1mm position, never smaller such as 0.05mm.

See the attached.

Grid size is set to X:0.1mm/Y:0.1mm for easier understanding.
Each stitch point is located at intersections of grid, never within grids.
Located at closest intersection point to digitized path line.

If stitches are uniformly distributed along the path, it means stiches are located at points less than Minimum stitch length, such as X0.05/Y0.02.
The machine cannot do that.

Hope my explanation can let you understand.
edited by Kazu on 2/20/2019]]> Wed, 20 Feb 2019 23:19:35 GMT https://dgcommunity.pulsemicro.com/topic505-distribution-stitch.aspx Wed, 20 Feb 2019 08:48:12 GMT https://dgcommunity.pulsemicro.com/topic505-distribution-stitch.aspx
To be able to assist you with this, we'd need more information about all of the settings you are using. We recommend contacting your local Pulse distributor to ask if they can take a look at the settings being applied to your segment. Perhaps a random stitch length setting is enabled, among other possibilities.]]> Tue, 19 Feb 2019 16:49:41 GMT https://dgcommunity.pulsemicro.com/topic505-distribution-stitch.aspx """]]> Tue, 19 Feb 2019 11:09:36 GMT