https://dgcommunity.pulsemicro.com/topic2375-error-wrong-functioncode-for-start-and-end-codes.aspx Tajima DG by Pulse Community - DG16 General Discussion - Error: Wrong functioncode for start and end codes - Messages en-us http://blogs.law.harvard.edu/tech/rss Jitbit AspNetForum Wed, 18 Sep 2024 20:01:25 GMT Wed, 18 Sep 2024 20:01:25 GMT https://dgcommunity.pulsemicro.com/topic2375-error-wrong-functioncode-for-start-and-end-codes.aspx Wed, 18 Sep 2024 20:01:25 GMT https://dgcommunity.pulsemicro.com/topic2375-error-wrong-functioncode-for-start-and-end-codes.aspx
How my I solve this issue?]]> Mon, 26 Aug 2024 08:15:20 GMT https://dgcommunity.pulsemicro.com/topic2375-error-wrong-functioncode-for-start-and-end-codes.aspx uniface we are working to reproduce the issue on our end.


In the meantime please reach out to your local Tajima Software distributor for support:
https://www.tajimasoftware.com/contact]]> Mon, 08 Jul 2024 15:19:55 GMT https://dgcommunity.pulsemicro.com/topic2375-error-wrong-functioncode-for-start-and-end-codes.aspx Mon, 08 Jul 2024 07:17:40 GMT https://dgcommunity.pulsemicro.com/topic2375-error-wrong-functioncode-for-start-and-end-codes.aspx Thu, 04 Jul 2024 07:09:59 GMT https://dgcommunity.pulsemicro.com/topic2375-error-wrong-functioncode-for-start-and-end-codes.aspx uniface do the error codes occur with every single TBF file? If it is every single TBF file, are all files created in the same version of DG? ]]> Wed, 03 Jul 2024 20:51:04 GMT https://dgcommunity.pulsemicro.com/topic2375-error-wrong-functioncode-for-start-and-end-codes.aspx
Recently I changed my setup for the design computer. So I made a clean setup of the DG16. Before I used a USB connection to transfer the design data to my Tajima tmar-k1506c. Now I have also set up a LAN connection which works pretty well. But I get a 2BE error when I try to upload TBF design data via USB and a 3BE error when I try to upload the same file with a LAN connection. This error only occurs with TBF versions, not with DST versions. How can I solve this problem?]]> Wed, 03 Jul 2024 13:50:17 GMT